V2000-c Rfid Access Control User Manual !!top!! Link
A: No, the V2000-c is a standalone controller . It does not have WiFi, Bluetooth, or Ethernet. For remote access, pair it with a separate network-enabled relay.
The V2000-C uses a multi-conductor pigtail cable. Connect the wires according to this functional guide: Power Positive (+12V DC) Black: Power Negative (GND) V2000-c Rfid Access Control User Manual
Normally Open (NO) – Connects to Fail-Secure locks (unlocks when energized). White: Common (COM) – Relay common terminal. A: No, the V2000-c is a standalone controller
Incorrect wiring is the #1 cause of V2000-c failure. Refer to the pinout diagram (usually on the rear of the device). or Ethernet. For remote access
