Slowly pull the dashboard toward the rear of the car by about two inches.
: Remove the negative terminal and wait at least 15–30 minutes to ensure the airbag system is fully discharged. Essential Tools : Torx screwdrivers (T20, T25). 10mm and 8mm sockets/wrenches. Plastic trim removal tools to avoid scratching panels. Radio removal keys. Step-by-Step Removal Process 1. Interior Components & Center Console
Use a 24mm socket to remove the central nut. Mark the position of the wheel relative to the steering column splines using a marker. Pull the wheel straight off.
: Unscrew the center nut (typically a large spline or hex bolt) and pull the wheel off. Disassemble Column Trim
Give you tips on replacing the heater core once the dash is out.
Remove the trim around the hazard light switch and cigarette lighter. Remove the ashtray.
Check for snagged wires (especially the clock or cigarette lighter) as you pull.