Do not use plumber's jointing compound, as it invalidates the guarantee; use PTFE tape instead.

: It must be fitted permanently to fixed electrical wiring and in a location subject to freezing or inside a steam room. The Shower Doctor The "Hidden" Maintenance Realities

By following this installation manual, you have successfully installed your Galaxy Aqua Premier system. With proper maintenance and care, your system will provide you with clean and safe drinking water for years to come.

: Re-fit the front cover, ensuring the internal control knobs align correctly with the spindle positions. Troubleshooting & Maintenance : If the water isn't heating, check the Thermal Cut Out (TCO)

: Ensure all wires are securely fastened in the terminal block with no bare copper showing. The earth wire must be the longest to ensure it is the last to disconnect if the cable is pulled. 5. Final Setup and Testing Galaxy Aqua Premier Water Heater 9.5Kw - 45793266

Tighten all terminal block screws fully. Ensure no insulation is trapped under the screws to prevent overheating. 3. Commissioning (Preventing Premature Failure) Fill Before Heating: