V5.13.0c !!link!! - Phison Mpall

Using MPALL incorrectly can permanently brick your USB drive . This tool is for Phison controllers only (detected via ChipGenius or USBDeview). Backup all data before proceeding — everything will be erased.

Recovers drives showing 0 bytes due to corrupted firmware. Phison Mpall V5.13.0c

| Version | Key Support | Remarks | | :--- | :--- | :--- | | | PS2251-61 only | Older, stable for that specific controller | | MPALL v3.63.0C | PS2251-02, -03, -67 | Enhanced USB 3.0 support; popular for 2013–2016 drives | | MPALL v3.71.0A | PS2251-xx (wide range) | Intermediate version before the 5.x series | | MPALL v5.13.0C | PS2251-01 through -91 (including later models) | Most comprehensive controller support; ideal for PS2251‑11 and newer chips | Using MPALL incorrectly can permanently brick your USB drive

: Typically Windows-based (Windows 7 through Windows 10/11). Step-by-Step Restoration Guide Using MPALL is a high-risk "last resort" process that erases all data permanently Identification : Use a tool like ChipGenius Recovers drives showing 0 bytes due to corrupted firmware

1. Run MPParamEdit_F1.exe 2. IC Type = Auto (or match controller) 3. Partition Mode = 2 (Public only) 4. Format = Tick + Low Level Format 5. Save .ini 6. Open main MPALL tool, load .ini, scan, start 7. Wait 5-10 minutes 8. Re-plug USB → fixed