Mikrotik L2tp Server Setup Full: ((free))

If you need users to access the internet through the VPN (split tunneling off), you need a NAT rule. Go to > Firewall > NAT . Click + : Chain: srcnat Src. Address: 192.168.80.0/24 (Your VPN Pool subnet) Action: masquerade Step 7: Testing the Configuration Test from an external network (e.g., mobile hotspot). Windows Client Setup: VPN Provider: Windows (built-in). Connection Name: Any name. Server Name/Address: Your Public IP or DDNS. VPN Type: L2TP/IPsec with pre-shared key. Pre-shared Key: The key you set in Step 3. Username/Password: The credentials from Step 4. Summary Checklist Key Setting 1. Pool IP > Pool Range (e.g., 192.168.80.0/24 ) 2. Profile PPP > Profiles Select Pool + Local IP 3. Server PPP > L2TP Server Use IPsec: yes 4. Secrets PPP > Secrets Service: l2tp 5. Firewall IP > Firewall 500,1701,4500 UDP

: Select the pool created in Step 1 ( l2tp-pool ). mikrotik l2tp server setup full

MikroTik simplifies L2TP setup by allowing you to enable built-in IPsec directly from the L2TP server settings. In the menu, click the Interface tab. Click the L2TP Server button at the top. Configure the following in the L2TP Server window: Enabled : Check the box. Default Profile : Select l2tp-profile . If you need users to access the internet