Soak up with inert absorbent material (e.g., sand, silica gel, acid binder, universal binder). Flush the remaining residue with plenty of water to eliminate the slipping hazard. 7. Handling and Storage
Shipping Nalco Ultimer 7752 is generally not regulated as a "dangerous good" by DOT (Dept. of Transportation) or IMDG (marine) for most solid forms, because it is not combustible or acutely toxic in package quantities. However, the MSDS will note that it is an in some jurisdictions (marine pollutant). Always check the current shipping paper requirements. nalco ultimer 7752 msds
: > 93.3°C (200°F), meaning it is not considered flammable. Soak up with inert absorbent material (e
Anionic or cationic polymer dispersion (depending on the specific sub-grade, though Ultimer technology generally utilizes water-in-water polymer dispersions). Handling and Storage Shipping Nalco Ultimer 7752 is
| Exposure | Immediate Action | | :--- | :--- | | | Move to fresh air. Unlikely to be hazardous due to low vapor pressure. | | Skin contact | Wash with soap and water. Remove contaminated clothing. | | Eye contact | Rinse immediately with water for 15 minutes. Hold eyelids open. Consult a physician if irritation persists. | | Ingestion | Rinse mouth. Do NOT induce vomiting. Drink 1-2 glasses of water. Seek medical advice. |
: This technology is highly effective. For example, replacing a traditional latex flocculant with ULTIMER in a refinery's wet gas scrubber increased solids capture efficiency from 92% to an average of 98% . The resulting environmental and cost savings include over 188 tons of reduced hazardous waste per year , over $75,000 in decreased hazardous waste disposal costs , and over $100,000 in annual chemical savings , totaling over $175,000 in annual value delivered.
: Immediately rinse eyes with plenty of water. Seek medical assistance if irritation develops.