Disco 240 Dmx Controller Manual Exclusive 【WORKING】

The Disco 240 DMX controller is a powerful and user-friendly lighting control device that can help you create stunning lighting effects for your events. By following the guidelines outlined in this article, you'll be able to set up, program, and operate the device with ease. Whether you're a seasoned lighting professional or a beginner, the Disco 240 DMX controller manual provides a comprehensive guide to getting the most out of your device.

Move the physical faders (1–12) to set colors, positions, gobos, or brightness. Use the Page Select button to access channels 13–20 if necessary. disco 240 dmx controller manual

Use the Bank Up/Down buttons to choose where you want to save the scene. The Disco 240 DMX controller is a powerful

Adjusts the speed of chases and the time between scenes. Rear Panel Connections DMX Output: 3-pin XLR connector to send signal to fixtures. Move the physical faders (1–12) to set colors,

Press and hold the Program button for roughly 3 seconds until a small LED indicator next to the display blinks. This confirms you are in edit mode. 2. Creating and Saving Chase Steps

The is a versatile 240-channel lighting console designed for managing moving heads, scanners, and LED fixtures in medium-sized setups like clubs and stages. It supports the simultaneous control of up to 12 fixtures with 16 or 20 channels each. 1. Physical Setup & Connections

: Tap MIDI/REC , select a BANK (Up/Down), then press a SCENE button (1-8). The display will flash to confirm. 2. Programming Chases Enter Program Mode . Select a CHASE button (1-6). Select the BANK and SCENE you wish to add as a step.